642-980 DCUFT Troubleshooting Cisco Data Center Unified Fabric

Exam Number 642-980 DCUFT
Associated Certifications CCNP Data Center Certification
Cisco Unified Fabric Support Specialist
Duration 90 minutes (65-75 questions)
Available Languages English

The 642-980 Troubleshooting Cisco Data Center Unified Fabric exam tests a candidate's troubleshooting skills in the Unified Fabric domain, troubleshooting connectivity issues, convergent I/O, Storage issues, as well as issues related to specific features like OTV (overlay transport virtualization) and it is associated with the CCNP DC certification and Cisco Unified Fabric Support Specialist certification.

The 642-980 Troubleshooting Cisco Data Center Unified Fabric exam tests a candidate's troubleshooting skills in the Unified Fabric domain, troubleshooting connectivity issues, convergent I/O, Storage issues, as well as issues related to specific features like OTV (overlay transport virtualization). This 90-minute, 65−75 question exam is associated with the CCNP DC certification and Cisco Unified Fabric Support Specialist certification. The exam is closed book and no outside reference materials are allowed.

The following topics are general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.

1.0 Troubleshooting Layer 2 Connectivity Issues in a Cisco Data Center Network 20%

1.1 Identify and resolve Ethernet port-channels issues

1.2 Identify and resolve vPC issues

1.3 Identify and resolve FabricPath issues

1.4 Identify and resolve PVLAN issues

2.0 Troubleshooting FCoe Issues in a Cisco Data Center Network 9%

2.1 Identify and resolve performance issues

2.2 Identify and resolve DCBX issues

3.0 Troubleshooting Storage Area Network in a Cisco Data Center 26%

3.1 Identify and resolve Fabric merge issues

3.2 Identify and resolve npv/npiv issues

3.3 Identify and resolve SAN port-channels/trunk issues

4.0 Troubleshooting DCI Issues in a Cisco Data Center Network 19%

4.1 Identify and resolve OTV issues

4.2 Identify and resolve HSRP issue in a DCI

5.0 Troubleshooting Platform Specific Issues in a Cisco Data Center Network 26%

5.1 Identify and resolve cfs issues

5.2 Identify and resolve Config-Sync Issues

5.3 Identify and resolve ISSU issues

5.4 Identify and resolve Fex issues

5.5 Identify and resolve VDC issues

5.6 Identify and resolve Layer1 issues

5.7 Identify and resolve cpu memory

5.8 Identify and resolve control plane policing (COPP) issues

---

QUESTION 2
The traffic across your port channels seems to be favoring one link over the other. How can you adjust the load-balancing policy to include source and destination MAC addresses, IP address, and TCP port?

A. kcdc-5010-1(config-if)# port-channel load-balance ethernet source-dest-port
B. kcdc-5010-1(config-if)# port-channel load-balance ethernet source-dest mac ip port
C. kcdc-5010-1(config)# port-channel load-balance ethernet source-dest-port
D. kcdc-5010-1(config)# port-channel load-balance ethernet source-dest mac ip port

Answer: C

---

QUESTION 2
Which two commands are used to determine the CoPP profile used on Cisco Nexus 7000 Series? (Choose two.)

A. #show copp profile
B. #show copp diff profile
C. #show copp status
D. #show running-config copp
E. #show policy-map interface control-plane

Answer: C,D

---

QUESTION 3
Storage VDC creation has failed. Which two steps should be taken before creating the storage VDC? (Choose two.)

A. Check that the F1 module has the FCoE license installed.
B. Check that the FCoE feature is enabled on the N7K.
C. Check that you have allocated the interfaces of the F module on the VDC.
D. Check that the network QoS non-drop policy is configured for FCoE traffic.
E. Check that the FCoE VLANs are allocated on the VDC.
F. Check that the M2 module has the FCoE license installed.

Answer: B,D

---

QUESTION 4
What is the correct configuration for interface Ethernet 1/1 of a Cisco Nexus 5000 Series Switch when it is a member of port channel 101 connected to FEX 101?

A. interface Ethernet1/1 switchport mode trunk switchport trunk native vlan 10
switchport trunk allowed vlan 20,30 fex associate 101
channel-group 101
B. interface Ethernet1/1
switchport mode fex-fabric channel-group 101
C. interface Ethernet1/1 switchport mode access switchport access vlan 10 fex associate 101 channel-group 101
D. interface Ethernet1/1 switchport mode fex-fabric fex associate 101 channel-group 101

Answer: D

---

QUESTION 5
You have upgraded your Cisco Nexus 7009 Switches and converted the default VDC to an admin VDC. You notice that all of the ACLs are still present on the admin VDC after the
conversion. What should you do?

A. enable configuration synchronization between the admin VDC and the production VDCs
B. delete the ACLs
C. delete all ACLs except those related to CoPP
D. delete all ACLs except those bound to resource templates
E. use the system admin-vdc acl command to properly migrate ACLs

Answer: B

Click here to view complete Q&A of 642-980 exam
Certkingdom Review

Best Cisco 642-980 Certification, Cisco 642-980 Training at certkingdom.com

642-887 SPCORE Implementing Cisco Service Provider Next-Generation Core Network Services

Exam Number 642-887 SPCORE
Associated Certifications CCNP Service Provider
Duration 90 minutes (65 - 75 questions)
Available Languages English
Register Pearson VUE

The 642-887 SPCORE Implementing Cisco Service Provider Next-Generation Core Network Services exam. This exam tests a candidate's knowledge of the concepts and implementation of MPLS technology and MPLS-TE services. It also validates the understanding of technology principles of basic Quality of Service, and Quality of Service with Multi Protocol Label Switching (MPLS) to implement advanced features and functions. Candidates can prepare for this exam by taking the Implementing Cisco Service Provider Next-Generation Core Network Services (SPCORE) course.

The 642-887, SPCORE, Implementing Cisco Service Provider Next-Generation Core Network Services exam is associated with the CCNP® Service Provider certification. This 90-minute, 65−75 questions exam tests a candidate's knowledge on the concepts and implementation of MPLS, LDP, MPLS-TE and QoS policies from the Service Provider perspective. This exam covers the Cisco IOS, IOS-XE and IOS-XR operating systems. Candidates can prepare for this exam by taking the Implementing Cisco Service Provider Next-Generation Core Network Services (SPCORE) course. The exam is closed book and no outside reference materials are allowed.

The following topics are general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.

1.0 QOS in a Service Provider IP NGN Environment 38%

1.1 Describe the DiffServ and IntServ QoS models

1.2 Describe the QoS mechanisms (classification and marking, congestion management and avoidance, traffic policing and shaping)

1.3 Describe IPv6 Flow Label

1.4 Describe trust boundaries in enterprise and SP environments

1.5 Describe Cisco MQC for QoS configurations

1.6 Describe hierarchical QoS configurations

1.7 Describe the Cisco NBAR feature for discovering network protocols and for packets classifications

1.8 Describe the typical Edge PE routers and Core P routers QoS requirements

1.9 Implement classification and marking in an inter-domain network using QPPB on Cisco IOS-XR and IOS-XE

1.10 Implement class-based markings on Cisco IOS-XR and IOS-XE

1.11 Implement QoS pre-classify on tunnel interface on Cisco IOS-XR and IOS-XE

1.12 Implement CB-WFQ on Cisco IOS-XR and IOS-XE

1.13 Implement LLQ on Cisco IOS-XR and IOS-XE

1.14 Implement WRED on Cisco IOS-XR and IOS-XE

1.15 Implement traffic policing on Cisco IOS-XR and IOS-XE

1.16 Implement traffic shaping on Cisco IOS-XR and IOS-XE

1.17 Describe LPTS and hardware rate limiters on Cisco IOS-XR routers

1.18 Describe MPLS EXP bits

1.19 Describe MPLS QoS implementation concepts and models

1.20 Implement MPLS DiffServ tunneling on Cisco IOS-XR and IOS-XE

1.21 Troubleshoot QoS IOS-XR and IOS-XE configuration errors

2.0 MPLS/LDP in a Service Provider IP NGN Environment 32%

2.1 Describe the CEF, FIB, LFIB and LIB tables on Cisco routers

2.2 Describe MPLS labels and label stack operations on Cisco routers

2.3 Describe LDP operations in Cisco routers

2.4 Describe MPLS OAM (MPLS LSP ping and MPLS traceroute)

2.5 Describe MPLS applications in service provider environment

2.6 Implement LDP on Cisco IOS-XR and IOS-XE

2.7 Implement LDP high availability features on Cisco IOS-XR and IOS-XE

2.8 Troubleshoot LDP on IOS-XR and IOS-XE configuration errors

3.0 MPLS/LDP in a Service Provider IP NGN Environment 22%

3.1 Describe MPLS traffic engineering (TE) concepts

3.2 Describe MPLS TE constraint-based path computations

3.3 Describe the details of MPLS TE tunnels, including path setup procedures and path maintenance

3.4 Describe methods of assigning traffic into MPLS TE tunnels

3.5 Implement MPLS TE tunnels on Cisco IOS-XR and IOS-XE

3.6 Implement MPLS TE bandwidth control on Cisco IOS-XR and IOS-XE

3.7 Implement MPLS TE link and node protections on Cisco IOS-XR and IOS-XE

4.0 Transport Technologies 8%

4.1 Describe the SP core transition from ATM/SONET/SDH based backbone to

packet based IP/MPLS backbone

4.2 Implement 10/40/100 Gigabit Ethernet Interfaces on Cisco IOS-XR routers

4.3 Describe DWDM, IPoDWDM and ROADM

4.4 Implement IPoDWDM controller/interface on Cisco IOS-XR routers
QUESTION 1
What is the correct formula for determining the CIR?

A. CIR = Bc/Tc
B. CIR = Bc x Tc
C. CIR = Tc/Bc
D. CIR = Bc + Be
E. CIR = Tc/(Bc+Be)
F. CIR = (Bc+Be)/Tc

Answer: A

Explanation:
Committed Information Rate (CIR) – the rate the device will send at (on average) over a one
second period.
The default CIR when traffic-shaping is enabled on the interface is 56K. CIR is also referred to as
the “target rate”. Since the device is forced to send at the AR, it does not send all of the time
(within one second) Â in order to send an average amount of data that equals the CIR.
Minimum CIR (mincir) – the rate the service provider guarantees to accept. Theoretically, the
provider will set the DE bit for all traffic above this rate. Mincir is designed to be used in
conjunction with adaptive shaping. With adaptive shaping, the router will throttle down in the event
of congestion. The router will not throttle down below this value.
Committed Burst (Bc) – the number of committed bits allows to be sent during a given interval.
The device sends an average amount of traffic to achieve the CIR. The Bc value defaults to 1/8 of
the configured CIR for speeds below 650K. For speeds above that, it is roughly 1/16 of CIR.
Excess Burst (Be) – the number of non-committed bits the router is allowed to send above Bc
during the first interval (Tc). The amount of Be “credits” is derived from unused Bc credits in
previous intervals. There is no limit to how long Be can “store” unused Bc credits. It is a common
misconception that Be can only store credits from the previous interval or the previous second.
There is no default Be value.
Committed Rate Measurement Interval (Tc) – the time interval over whic Bc or Bc+Be can be
transmitted. The max value is 125 ms and the minimum value is 10 ms.
The Formula
CIR, Tc, and Bc are related mathematically by the following formula:
CIR = Bc/(Tc/1000) Notice the division of Tc by 1000 is used to convert milliseconds into seconds
– the common measurement of CIR and Bc.

---

QUESTION 2
DS-TE implementations on Cisco routers support which bandwidth pool(s) and class type(s)?
(Choose two.)

A. global pool only
B. subpool only
C. global pool and subpool
D. class-type 0 only
E. class-type 1 only
F. class-type 0 and class-type 1

Answer: C,F

Explanation:
Differential Service Tunnels
Differential Service Traffic Engineering (TE) is an extension of the regular MPLS Traffic
Engineering (MPLSTE) feature. Regular TE does not provide bandwidth guarantees to different
traffic classes. A single bandwidth pool (global pool) is used in regular TE that is shared by all
traffic. In order to support various class of service (CoS), the ability to provide multiple bandwidth
pools is required. These bandwidth pools then can be treated differently based on the requirement
for the traffic class using that pool.
In RSVP global and subpools reservable bandwidths are configured on a per interface basis to
accommodate TE tunnels on the node. Available bandwidth from all configured bandwidth pools is
advertised using Interior Gateway Protocol (IGP). RSVP is used to signal the TE tunnel with
appropriate bandwidth pool requirements.

---

QUESTION 3
Which field in the MPLS shim header is used to support different QoS markings?

A. IP precedence
B. DSCP
C. EXP
D. ToS
E. S
F. Label

Answer: C

Explanation:
MPLS EXP Marking
The three MPLS EXP (experimental) bits in the shim header of an input or output MPLS packet
header may be set or changed by a user configured value

---

QUESTION 4
On a Cisco IOS XR router, which mechanism protects the router resources by filtering and policing
the packets flows that are destined to the router that is based on defined flow-type rates?

A. LLQ
B. LPTS
C. Committed Access Rate
D. Control Plane Policing
E. Management Plane Protection
F. NetFlow
G. ACL

Answer: B

Explanation:
Local Packet Transport Services (LPTS) maintains tables describing all packet flows destined for
the secure domain router (SDR), making sure that packets are delivered to their intended
destinations.
The Low Latency Queueing feature brings strict priority queueing to Class-Based Weighted Fair
Queueing (CBWFQ).

---

QUESTION 5
When configuring LLQ (strict priority queue) on a traffic class using the Cisco IOS XR priority
command on a Cisco ASR9K router, which additional QoS command is required for this traffic class?

A. shape
B. police
C. random-detect
D. bandwidth

Answer: B

Explanation:
The Low Latency Queueing feature brings strict priority queueing to Class-Based Weighted Fair
Queueing (CBWFQ).

Click here to view complete Q&A of 642-887 exam
Certkingdom Review

Best Cisco 642-887 Certification, Cisco 642-887 Training at certkingdom.com

Exam 70-573 TS: Microsoft SharePoint 2010, Application Development

Published: July 12, 2010
Languages: English
Audiences: Developers
Technology: Microsoft SharePoint Server 2010
Credit toward certification: MCTS, MCPD

Skills measured
This exam measures your ability to accomplish the technical tasks listed below. The percentages indicate the relative weight of each major topic area on the exam. The higher the percentage, the more questions you are likely to see on that content area on the exam. View video tutorials about the variety of question types on Microsoft exams.

Please note that the questions may test on, but will not be limited to, the topics described in the bulleted text.

Do you have feedback about the relevance of the skills measured on this exam? Please send Microsoft your comments. All feedback will be reviewed and incorporated as appropriate while still maintaining the validity and reliability of the certification process. Note that Microsoft will not respond directly to your feedback. We appreciate your input in ensuring the quality of the Microsoft Certification program.

If you have concerns about specific questions on this exam, please submit an exam challenge.

If you have other questions or feedback about Microsoft Certification exams or about the certification program, registration, or promotions, please contact your Regional Service Center.

Working with the SharePoint user interface (19%)
Manage SPSite and SPWeb programmatically by using Visual Studio 2010
Creating sub webs, referencing SPFiles, manipulating property bag, when to call Update, referencing SPContext, SPSite, SPWeb, SPSite.OpenWeb, SPWeb.Webs, feature activation and deactivation
This objective does not include: trivial cases such as setting title and other loose properties of the objects
Implement a dialog by using the dialog framework
Create dialogs from JavaScript or from server side, display dialogs
Create a custom ribbon object
Adding custom actions to the ribbon, customizing groups, customizing tabs, customizing the existing ribbon
Customize navigation programmatically
TopNav bar, quick launch, custom actions
This objective does not include: custom menu controls, custom site map providers
Create and apply branding to a SharePoint site
Applying custom master pages to content pages and application pages, placeholders, page layouts, programmatically working with themes, deploying CSS, CSSlink, ScriptLink
This objective does not include: graphic design, creating a CSS

Preparation resources
User interface customization resource center | SharePoint 2010
SharePoint 2010 UI customization
Customizing and extending the SharePoint 2010 Server ribbon

Developing web parts and controls (21%)
Create web parts
Including properties, controls using render vs. CreateChildControl, life cycle, visual, standard web parts
This objective does not include: trivial case where developer uses visual web part project template
Create connectable web parts
Implement consumer/provider interfaces
Debug web parts
ULS log, and event log, debug.log tracing, developer dashboard
Create and implement delegate controls
Overriding existing controls with lower sequence, developing and using .ascx files

Preparation resources
Walkthrough: Creating a basic web part
SharePoint 2010: Developing connected web parts
How to: Customize a delegate control

Developing business logic (19%)
Implement a custom workflow in Visual Studio 2010
Work with initiation data or association data to create a SharePoint task, extend a workflow imported from SharePoint Designer 2010, use a HandleExternalEvent and CallExternalMethod to interact with a custom local service, work with initiation data or association data in a site workflow, correlation token
This objective does not include: trivial cases such as workflows with no custom actions, initiation data, association data
Create a custom workflow action
Create a custom SPD action, create and add a custom activity to a Visual Studio workflow, define an action.xml file
Create and implement event receivers
Accessing event properties, list, item, site, email, avoiding recursion, cancelling events, choosing synchronization state
Customize Enterprise Content Management (ECM)
Creating a content type that inherit from appropriate parent, creating and implementing a custom publishing field control that is page mode aware, activating a master page programmatically including token usage
This objective does not include: page layouts, formatting
Create, implement and debug a timer job
Configuration, programmatic scheduling, queuing, attaching debugger to the timer service
Create and modify Business Connectivity Service model in Visual Studio 2010
Create a BDC model in Visual Studio 2010, define insert, update and delete methods, create and read items, make data searchable
Manage users, groups, permissions
SPGroups, SPUser, permission inheritance, all securable objects, SPRoleDefinition, SPRole, SPRoleAssignment

Preparation resources
Workflow development in Visual Studio
Enterprise Content Management (ECM) development in SharePoint Server 2010
Using the SharePoint Business Data Connectivity designer in VS 2010

Working with SharePoint data (22%)
Access list data by using the Server object model
SPQuery, LINQ, SPList, SPSiteDataQuery, schema management, working with a query governor, create LINQ query that includes a join statement, SPQuery vs. SPSiteDataQuery
Access SharePoint data by using WCF data services
WCF ListData.svc, RESTFUL URLs conventions, create and use a client service reference
Access (CRUD) data by using the client object model
Javascript, .NET, Silverlight, build Silverlight user interface for SharePoint using client object model, query data by using CAML over the client object model in Silverlight, non-data API (site, web, list, access)
Work with documents programmatically
SPFile, SPFolder, SPVersion, upload document and set meta data
Work with the meta data
Access data from user profiles, taxonomy, folksonomy
Extending SharePoint search
Creating a custom query using full text query or keyword query, customize the look and feel of the search result using XSLT
Implement and debug code that executes in an alternative security context
Create code that uses the RunWithElevatedPrivileges delegate (including debugging), create code that uses the system account, create code that impersonate a different user
Create and modify a custom content type
Declaratively and programmatically creating and upgrading content type using Visual Studio 2010, modifying an existing content type, site columns

Preparation resources
Using the client object model
Accessing SharePoint 2010 lists by using WCF data services
Extending search

Stabilizing and deploying SharePoint components (19%)
Manage a solution in Visual Studio 2010
Modify the contained features in the solution, add an assembly that is not included in the visual studio solution, manage mapped folders for localization, sandbox and farm solutions, customize manifest.xml
Manage a feature by using Visual Studio 2010
Upgrading, localizing, versioning, developing features, feature receivers (activating and installing) that interact with their parent object, customizing feature.xml
This objective does not include: features without elements
Store and retrieve configuration data
App config, web config, persisted object, list, xml, file system, cookies, property bag
Create a site definition by using Visual Studio 2010
Feature activation, site provisioning, localization
This objective does not include: list definitions and modules defined in ONET.xml, SharePoint Designer
Manage SharePoint object life cycle by using the dispose API
SPWeb, SPContext, IDisposable, Try…Catch…Finally, using blocks
Develop, debug, and deploy sandboxed solutions
APIs that are allowed or not allowed in sandbox, use a full trust proxy

Preparation resources
SharePoint development in Visual Studio
Creating SharePoint 2010 site definitions in Visual Studio 2010
Developing, deploying, and monitoring sandboxed solutions in SharePoint 2010

---

QUESTION 1
You create a Web Part by using Microsoft Visual Studio 2010. You need to execute SPDisposeCheck.exe before the Web Part is deployed. What should you do?

A. Configure a pre-deployment command line.
B. Configure SPDisposeCheck.exe as an external tool.
C. Change the configuration from Active (Debug) to Release.
D. Change the active deployment configuration to No Activation.

Answer: A

Explanation:
MNEMONIC RULE: "before deployed = pre-deployment"
How to: Set SharePoint Deployment Commands
http://msdn.microsoft.com/en-us/library/ee231534.aspx

---

QUESTION 2
You have a SharePoint site collection. The root Web of the site collection has the URL http://intranet.
You plan to create a sandboxed solution that will contain a Web Part. The Web Part will display the title of the root Web.
You write the following code segment for the Web Part. (Line numbers are included for reference only.)
01 SPSite currentSite = new SPSite("http://intranet");
02
03 Label currentTitle = new Label();
04 currentTitle.Text = currentSite.RootWeb.Title;
You add the Web Part to a page in the root Web and receive the following error message: "Web Part Error: Unhandled exception was thrown by the sandboxed code wrapper's Execute method in the partial trust app domain: An unexpected error has occurred."
You need to prevent the error from occurring.
What should you do?

A. Add the following line of code at line 02: currentSite.OpenWeb();
B. Add the following line of code at line 02: currentSite.OpenWeb("http://intranet");
C. Change line 01 to the following code segment: SPSite currentSite = SPContext.Current.Site;
D. Change line 04 to the following code segment: currentTitle.Text = currentSite.OpenWeb().Title;

Answer: C

Explanation:
MNEMONIC RULE: "sandboxed = SPContext"
OpenWeb() method returns SPWeb object, so answers A and B are incorrect, since they assume OpenWeb()method doesn't return an object.
Answer D is incorrect for the same reason.
This constructor is allowed in sandboxed solutions. in that case, the value of the requestUrl parameter mustresolve to the parent site collection in which the sandboxed solution is deployed. If the value of the requestUrl parameter resolves to the URL of any other site collection, the constructor throwsan exception because a sandboxed solution is not allowed to access any SharePoint objects outside its hostingsite collection.
SPSite Constructor (String) http://msdn.microsoft.com/en-us/library/ms466911.aspx

---

QUESTION 3
You are creating a Web Part that will be deployed as a sandboxed solution. You need to ensure that the Web Part can write debugging information to the SharePoint trace logs. Which class should the logging component inherit?

A. SPDelegate
B. SPLog
C. SPPersistedObject
D. SPProxyOperation

Answer: D

Explanation:
MNEMONIC RULE: "sandboxed solution needs SPProxyOperation"
You can implement your full-trust functionality in classes that derive from the SPProxyOperation abstract classand deploy the assembly to the global assembly cache. These classes expose a full-trust proxy that you cancall from within the sandbox environment.
Full-trust proxies can provide a useful way to expose logging and configuration functionality to sandboxedapplications.
Hybrid Approaches http://msdn.microsoft.com/en-us/library/ff798433.aspx

---

QUESTION 4
You need to create a Web Part that will store and retrieve information for the current subsite. Which object should you use?

A. SPContext.Current.Site.RootWeb.AllProperties
B. SPContext.Current.Site.RootWeb.Configuration
C. SPContext.Current.Web.Configuration
D. SPContext.Current.Web.Properties

Answer: D

Explanation:
MNEMONIC RULE: "information is in Web.Properties" SPContext.Current.Web is SPWeb object.
Properties is the SPPropertyBag object with the metadata for the website. SPWeb.Properties Property http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.spweb.properties.aspx

---

QUESTION 5
You create a SharePoint solution. You deploy the SharePoint solution by using Microsoft Visual Studio 2010. You need to prevent the Feature that is contained in the solution from being automatically activated when you deploy the solution. What should you configure in Visual Studio 2010?

A. the active deployment configuration
B. the build configuration
C. the pre-deployment command line
D. the startup item

Answer: A

Explanation:
MNEMONIC RULE: "deploy the solution = active deployment configuration" How to: Edit a SharePoint Deployment Configuration http://msdn.microsoft.com/en-us/library/ee231587.aspx
Walkthrough: Creating a Custom Deployment Step for SharePoint Projects http://msdn.microsoft.com/en-us/library/ee256698.aspx

Click here to view complete Q&A of 70-573 exam
Certkingdom Review

Best Microsoft MCTS Certification, Microsoft 70-573 Training at certkingdom.com

642-742 IUWVN Implementing Cisco Unified Wireless Voice Networks

Exam Number 642-742 IUWVN
Last day to test: September 21, 2016
Associated Certifications CCNP Wireless
Duration 90 minutes (50 - 60 questions)
Available Languages English
Register Pearson VUE
Exam Policies Read current policies and requirements
Exam Tutorial Review type of exam questions

The 642-742 IUWVN Implementing Cisco Unified Wireless Voice Networks exam is the exam associated with the CCNP Wireless certification. This exam assesses a candidate's capability to integrate VoWLAN services into the WLAN and be able to implement QoS, MPLS, and high bandwidth applications into the wireless network. Candidates can prepare for this exam by taking the IUWVN Implementing Cisco Unified Wireless Voice Networks course.

The Implementing Cisco Unified Wireless Voice Networks (IUWVN) version 2.0 642-742 exam is a 90-minute test with 55−75 questions associated with the Cisco CCNP® Wireless certification. This exam assesses a candidate's ability to integrate VoWLAN services into the WLAN and be able to implement QoS, MPLS, and high-bandwidth applications in the wireless network. The exam is closed book and no outside reference materials are allowed.

The following topics are general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.

1.0 Describe and Design Voice Over Wireless Architecture 27%
1.1 Describe voice as it applies to the wireless network

1.1.a Components (hardware and software)
1.1.b Call setup/data flow overview
1.1.c Other wireless voice and video services
1.1.d Standards (.11r, .11e, .11n, and so on)
1.1.e Cisco Compatible Extensions (voice features)
1.1.f WMM
1.1.g UAPSD
1.1.h Codecs
1.1.i Signaling Connection Control Part (SCCP)
1.1.j SIP

1.2 Design wireless for voice
1.2.a Minimum speed requirements—RSSI and SNR
1.2.b Overlap requirements
1.2.c Cell separations
1.2.d Traffic separation, QoS, voice VLAN
1.2.e Delay and jitter reqs
1.2.f Testing tools (AirMagnet and Veriwave)
1.2.g CAC and TSPEC
1.2.h Spectrum
1.2.i 802.11n
1.2.j Wireless voice client requirements

1.3 Utilize other design considerations, as per the voice design guide
1.3.a VAD
1.3.b MOH
1.3.c Load balancing

1.4 Validate wireless network design for voice readiness
1.4.a Utilize the WCS voice readiness tool
1.4.b Validate site survey for voice

1.5 Validate infrastructure requirements for end-to-end voice over wireless
1.5.a Cisco Unified Communications Manager
1.5.b Cisco Unified Communications Manager Express
1.5.c QoS
1.5.d ACS
1.5.e DHCP
1.5.f TFTP
1.5.g Routers
1.5.h Security devices

1.6 Describe VoWLAN integration with cellular providers

2.0 Implement VoWLAN 23%

2.1 Configure wireless client devices

2.1.a Reference current best practice guidelines
2.1.b Device security considerations

2.2 Configure the WLAN for VoWLAN
2.2.a Implement current best practice guidelines
2.2.b Security configurations (PEAP, EAP-TLS, EAP-FAST)
2.2.c CCKM/PKC, 802.11r

2.3 Troubleshoot VoWLAN implementation
2.3.a Spectrum Expert
2.3.b AirMagnet VoFi analyzer
2.3.c Traffic stream metrics (TSM)
2.3.d Incremental complexity testing

3.0 Implement QoS for Wireless Applications 20%

3.1 Describe and implement general considerations for wired QoS
3.1.a Configurations
3.1.b DSCP/802.1p
3.1.c Voice VLAN

3.2 Describe and implement the appropriate wireless QoS deployment schemes
3.2.a WMM
3.2.b 802.11e
3.2.c Mapping—wired to wireless (five and six mismatching)

3.3 Configure WCS/WLC for QoS
3.3.a CAC
3.3.b TSPEC
3.3.c QBSS
3.3.d Queues
3.3.e Bandwidth reservation
3.3.f Disable "DHCP Required"
3.3.g Disable Address Resolution Protocol (ARP) unicast
3.3.h Enable ARP caching
3.3.i Cisco Identity Based Networking (IBN) services

3.4 Reference most current best practice guidelines

4.0 Implement multicast over wireless 17%

4.1 Describe general multicast concepts

4.1.a PIM (sparse and dense)
4.1.b Cisco Group Management Protocol
4.1.c IGMP snooping
4.1.d RP

4.2 Describe implications for multicast in 802.11
4.2.a Highest mandatory data rate
4.2.b Unicast and multicast modes
4.2.c Roaming
4.2.d Mesh
4.2.e Controllers having same CAPWAP multicast group
4.2.f Video stream (reliable multicast)

4.3 Configure multicast in a wireless network
4.3.a Infrastructure multicast group
4.3.b IGMP snooping on the controller
4.3.c Video stream (reliable multicast)
4.3.d Mobility group multicast

4.4 Troubleshoot multicast in a wireless network
4.4.a Packet captures
4.4.b Show IPM route
4.4.c Controller logs
4.4.d Debugs
4.4.d [i] debug bcast igmp enable command
4.4.d [ii] debug mobility multicast enable command

5.0 Prepare the Wireless Network for Video and High-Bandwidth Applications 13%

5.1 Describe benefits of 802.11n for video

5.2 Determine bandwidth requirements for specified applications

5.3 Identify application-specific wireless network requirements

5.3.a WLC to wired network
5.3.b Multicast for wireless video
5.3.c Wireless security cameras
5.3.d Real-time video streaming and video conferencing

---

QUESTION 1
RADIUS is set up with multiple servers on the controller and an engineer wants to select each server for specific WLANs. Where in the controller GUI is this configuration completed?

A. Security > AAA > RADIUS
B. Security > AAA > RADIUS > Fallback
C. Security > Authentication > RADIUS
D. WLANs > WLAN ID > Security > AAA Servers
E. WLANs > WLAN ID > Security > Layer 3
F. WLANs > WLAN ID > Advanced > AAA Servers

Answer: D

---

QUESTION 2
An engineer must change the wireless authentication from WPA2-Personal to WPA2-Enterprise. Which three requirements are necessary? (Choose three.)

A. 802.1X
B. EAP
C. fast secure roaming
D. 802.11i
E. RADIUS
F. 802.11u
G. pre-shared key

Answer: A,B,E

---

QUESTION 3
An engineer must segment traffic into separate WLANs. Which three factors should be used to determine traffic segmentation? (Choose three.)

A. QoS policy
B. subnet requirements
C. application requirements
D. security capabilities
E. access control policies for voice
F. enterprise resource planning

Answer: A,C,D

---

QUESTION 4
Which three RADIUS IETF attributes should be enabled on the Cisco Secure ACS v4.2 when implementing IBN for VLAN assignment to the Cisco WLC v7.0? (Choose three.)

A. [064] Tunnel-Type
B. [065] Tunnel-Medium-Type
C. [066] Tunnel-Client-Endpoint
D. [067] Tunnel-Server-Endpoint
E. [069] Tunnel-Password
F. [081] Tunnel-Private-Group-ID
G. [082] Tunnel-Private-User-ID

Answer: A,B,F

---

QUESTION 5
An engineer is changing the encryption method of a wireless network from PEAP-MS-CHAP V2 to EAP-TLS. Which two changes are necessary? (Choose two.)

A. The authentication server requires a new certificate.
B. All authentication clients require their own certificates.
C. The users require the Cisco AnyConnect client.
D. A new certificate is required for each authenticated user.
E. A Cisco NAC server is required.
F. Cisco Secure ACS is required.

Answer: A,B

Click here to view complete Q&A of 642-742 exam
Certkingdom Review

Best Cisco 642-742 Certification, Cisco 642-742 Training at certkingdom.com

642-035 DCUCT Troubleshooting Cisco Unified Computing

642-035 DCUCT Troubleshooting Cisco Unified Computing

Exam Number 642-035 DCUCT
Associated Certifications CCNP Data Center Certification
Cisco Unified Computing Support Specialist
Duration 90 minutes (65-75 questions)
Available Languages English

The 642-035 Troubleshooting Cisco Data Center Unified Computing exam tests a candidate's skills of troubleshooting a virtualized computing environment based on Cisco Unified Computing System platform, focusing on features like storage and network connectivity, installation, memory issues, booting issues, drivers, BIOS and adapters connectivity issues. This exam is associated with the CCNP DC Certification and Cisco Unified Computing Support Specialist Certification.

The 642-035 Troubleshooting Cisco Data Center Unified Computing exam tests a candidate's skills of troubleshooting a virtualized computing environment based on Cisco Unified Computing System platform, focusing on features like storage and network connectivity, installation, memory issues, booting issues, drivers, BIOS and adapters connectivity issues. This 90-minute, 65−75 questions exam is associated with the CCNP® DC Certification and Cisco Unified Computing Support Specialist Certification. The exam is closed book and no outside reference materials are allowed.

The following topics are general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.

1.0 Troubleshooting UCS Architecture and System Internals 24%

1.1 Extract diagnostic data i.e., collecting dumps and core files

1.2 Identify issues using FSM

1.3 Troubleshoot boot issues

1.3.a Blades
1.3.b OS

1.4 Identify using CLI/GUI defective hardware

1.5 Troubleshoot management 0 KVM IP overlap issues

2.0 Troubleshooting UCS Installation, Configuration, and Startup 17%

2.1 Configure and troubleshoot RBAC

2.2 Configure and troubleshoot modes and perform reboots

2.3 Configure and troubleshoot power consumption, power availability, and power policies

2.4 Manage service profiles

2.5 Understand and troubleshoot the UCSM upgrade process

3.0 Troubleshooting UCS SAN/LAN/VLAN Connectivity 12%

3.1 Configure and capture SPAN traces

3.2 Troubleshoot fiber channel services

3.3 Troubleshoot L2 issues

3.4 Troubleshoot link-level issues

3.5 Configure and troubleshoot jumbo frames

3.6 Troubleshoot dynamic vNIC

4.0 UCS Compute Troubleshooting 13%

4.1 Troubleshoot CIMC GUI and CLI remote access methods

4.2 Using CLI/GUI Troubleshoot packet flow from server to the fabric

4.3 Identify the steps that need to be performed on a rack standalone prior to integration into the UCSM

4.4 Describe the various methods to update the server BIOS/CIMC/adapters/array controllers

4.5 Troubleshoot OS driver issues

4.6 Troubleshoot memory issues

4.7 Troubleshoot boot issues

4.8 Troubleshoot redundant paths

4.9 Troubleshoot different adapters

4.10 Describe the process for password recovery

5.0 UCS C-Series Standalone Troubleshooting 34%
5.1 Troubleshoot using CIMC GUI and CLI remote access methods

5.2 Use CIMC utilities for performance validation and data gathering activities

5.3 Update the server with the various methods

5.3.a BIOS
5.3.b CIMC
5.3.c Adapters
5.3.d Array Controllers
5.3.e LOM

5.4 Troubleshoot OS driver issues

5.5 Troubleshoot memory issues

5.6 Troubleshoot boot issues

5.7 Troubleshoot Local Disk and RAID controller

5.8 Troubleshoot FCoE Connectivity

5.9 Describe the process for password recovery

QUESTION 1
You must check the path that vNICs uses to communicate. How can you verify whether a vNIC on a Cisco UCS server is in an active state or a failover state?

A. Run the show interface brief command.
B. Connect to the adapter and execute the Master Control Program.
C. Compare the state on both fabric interconnects.
D. Run the show interface status command.

Answer: C

---

QUESTION 2
Which CLI command will indicate whether a Cisco UCS C-Series rack-mount server has any failed DIMMs?

A. ucs-c250 / # scope chassis
ucs-c250 /chassis # show dimm-summary B. ucs-c250 / # scope chassis
ucs-c250 /chassis # show dimm-fault C. ucs-c250 / # scope chassis ucs-c250 /chassis # show dimm-ecc D. ucs-c250 / # scope chassis
ucs-c250 /chassis # show dimm-recovery

Answer: A

---

QUESTION 3
How many FSM tasks can run concurrently on a server?

A. 1
B. 2
C. 4
D. 16

Answer: A

---

QUESTION 4
You are troubleshooting a remote Cisco UCS environment that has Cisco UCS 2208 I/O Modules. Some of the links from the IOMs to the UCS Fabric Interconnect fail to work as expected. You check whether the SFP is in place and the state of the IOM ports. Which command do you use to view the MAC and PHY status to determine whether the SFP is detected in the IOM?

A. show platform software redwood oper
B. show platform software woodsideoper
C. show platform software woodsidests
D. show platform software redwood post

Answer: B

---

QUESTION 5
Looking at the Equipment > Chassis > Servers > Server X view from the Cisco UCS Manager GUI, which tab would you select to identify the fabric interconnect uplink associated with a given virtual circuit?

A. Paths
B. vNIC Paths
C. Virtual Circuit Paths
D. VIF Paths

Answer: D

Click here to view complete Q&A of 642-035 exam
Certkingdom Review

Best Cisco 642-035 Certification, Cisco 642-035 Training at certkingdom.com

640-911 DCICN Introducing Cisco Data Center Networking

Exam Number 640-911 DCICN
Associated Certifications CCNA Data Center Certification
Duration 90 minutes (65-75 questions)
Available Languages English

This exam tests a candidate's knowledge of networking concepts for the Data Center environment, based on Nexus-OS. You will learn fundamental information on how a Data center network works, how to configure virtualization in the network, addressing schemes, troubleshooting and configuration skills.

The 640-911 DCICN "Introducing Cisco Data Center Networking" is one of the exams associated with the CCNA® Data Center certification. This 90-minute 65−75 questions exam tests a candidate's knowledge of networking concepts for the Data Center environment, based on Nexus-OS. You will learn fundamental information on how a Data Center network works; and how to configure virtualization in the network, addressing schemes, troubleshooting and configuration skills. Candidates can prepare for this exam by taking the course 640-911 DCICN, "Introducing Cisco Data Center Networking".

The following topics are general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.

1.0 Describe How a Network Works 15%

1.1 Describe the purpose and functions of various network devices

1.1.a Interpret a network diagram
1.1.b Define physical network topologies

1.2 Select the components required to meet a network specification

1.2.a Switches
1.2.b Describe and identify Nexus hardware specifications
1.2.c Describe and identify Nexus licensing requirements

1.3 Use the OSI and TCP/IP models and their associated protocols to explain how data flows in a network

1.3.a IP
1.3.b TCP
1.3.c UDP

1.4 Describe the purpose and basic operation of the protocols in the OSI and TCP

1.4.a TCP/IP
1.4.b OSI layers

2.0 Configure, Verify and Troubleshoot a Switch with VLANs and Interswitch Communications Using Nexus 21%

2.1 Explain the technology and media access control method for Ethernet

2.1.a IEEE 802 protocols
2.1.b CSMA/CD

2.2 Explain basic switching concepts and the operation of Cisco switches

2.2.a Layer 2 addressing
2.2.b MAC table
2.2.c Flooding

2.3 Describe and configure enhanced switching technologies

2.3.a VTP
2.3.b VLAN
2.4.c 802.1q
2.5.d STP

3.0 Implement an IP Addressing Scheme and IP Services to Meet Network Requirements in a Medium-Size Enterprise Branch Office Network Using Nexus 12%

3.1 Describe the operation and benefits of using private and public IP addressing

3.1.a Classfull IP addressing
3.1.b RFC 1918
3.1.c RFC 4193

3.2 Describe the difference between IPv4 and IPv6 addressing schemes

3.2.a Comparative address space
3.3.b Host addressing

4.0 Configure, Verify, and Troubleshoot Basic Router Operation and Routing on Cisco Devices Using Nexus 52%

4.1 Describe and configure basic routing concepts

4.1.a Packet forwarding
4.1.b Router look-up process (Exec mode, Exec commands, Configuration mode)

4.2 Describe the operation of Cisco routers

4.2.a Router boot-up process
4.2.b POST
4.3.c Router components

---

QUESTION 1
How many bits are in an IPv4 address?

A. 32
B. 24
C. 8
D. 4

Answer: A

---

QUESTION 2
Which two options are groups of network protocols that are categorized into the following OSI layers: application, data link, network, and transport? (Choose two.)

A. FTP, LLDP, GRE, BGP
B. RDP, CDP, EIGRP, UDP
C. SSH, LLDP, ICMP, TCP
D. Telnet, ICMP, EIGRP, FTP

Answer: B,C

---

QUESTION 3
A customer wants to connect to their SAN via Fibre Channel. Which two devices can be used to provide connectivity? (Choose two.)

A. Cisco MDS 9148 Multilayer Fabric Switch
B. Cisco Nexus 7010 Switch
C. Cisco Nexus 5548UP Switch
D. Cisco Catalyst 6509 Switch
E. Cisco Nexus 2248TP GE Fabric Extender

Answer: A,C

---

QUESTION 4
Which device forwards data based on the destination IP address?

A. repeater
B. bridge
C. switch
D. router
E. hub

Answer: D

---

QUESTION 5
Which three options describe routers compared to switches? (Choose three.)

A. use IP address tables for information lookup
B. concerned with packet forwarding
C. operate at Layer 3 of the OSI model
D. operate at Layer 2 of the OSI model
E. use MAC address tables for information lookup
F. concerned with the local delivery of frames

Answer: A,B,C

Click here to view complete Q&A of 640-911 exam
Certkingdom Review

Best Cisco 640-911 Certification, Cisco 640-911 Training at certkingdom.com

Exam 70-494 Recertification for MCSD: Web Applications

Published: August 1, 2014
Languages: English, Japanese
Audiences: Developers
Technology: ASP.NET MVC
Credit toward certification: MCP, MCSD

Skills measured
This exam measures your ability to accomplish the technical tasks listed below. View video tutorials about the variety of question types on Microsoft exams.

Please note that the questions may test on, but will not be limited to, the topics described in the bulleted text.

Do you have feedback about the relevance of the skills measured on this exam? Please send Microsoft your comments. All feedback will be reviewed and incorporated as appropriate while still maintaining the validity and reliability of the certification process. Note that Microsoft will not respond directly to your feedback. We appreciate your input in ensuring the quality of the Microsoft Certification program.

If you have concerns about specific questions on this exam, please submit an exam challenge.

If you have other questions or feedback about Microsoft Certification exams or about the certification program, registration, or promotions, please contact your Regional Service Center.

Design the application architecture
Plan the application layers
Plan data access; plan for separation of concerns; appropriate use of models, views, and controllers; choose between client-side and server side processing; design for scalability
Design a distributed application
Design a hybrid application (on-premises versus off-premises, including Azure), plan for session management in a distributed environment, plan web farms
Design and implement the Azure role life cycle
Identify and implement Start, Run, and Stop events; identify startup tasks (IIS configuration [app pool], registry configuration, third-party tools)
Configure state management
Choose a state management mechanism (in-process and out of process state management), plan for scalability, use cookies or local storage to maintain state, apply configuration settings in web.config file, implement sessionless state (for example, QueryString)
Design a caching strategy
Implement page output caching (performance oriented), implement data caching, implement HTTP caching, implement Azure caching
Design and implement a WebSocket strategy
Read and write string and binary data asynchronously (long-running data transfers), choose a connection loss strategy, decide a strategy for when to use WebSockets, implement SignalR

Design and develop the user experience
Plan an adaptive UI layout
Plan for running applications in browsers on multiple devices (screen resolution, CSS, HTML), plan for mobile web applications
Design and implement MVC controllers and actions
Apply authorization attributes, global filters, and authentication filters; specify an override filter; implement action behaviors; implement action results; implement model binding

Troubleshoot and debug web applications
Test a web application
Create and run unit tests (for example, use the Assert class), create mocks; create and run web tests, including using Browser Link; debug a web application in multiple browsers and mobile emulators
Debug an Azure application
Collect diagnostic information by using Azure Diagnostics API and appropriately implement on demand versus scheduled; choose log types (for example, event logs, performance counters, and crash dumps); debug an Azure application by using IntelliTrace, Remote Desktop Protocol (RDP), and remote debugging; interact directly with remote Azure websites using Server Explorer

Design and implement security
Configure authentication
Authenticate users; enforce authentication settings; choose between Windows, Forms, and custom authentication; manage user session by using cookies; configure membership providers; create custom membership providers; configure ASP.NET Identity
Configure and apply authorization
Create roles, authorize roles by using configuration, authorize roles programmatically, create custom role providers, implement WCF service authorization
Design and implement claims-based authentication across federated identity stores
Implement federated authentication by using Azure Access Control Service; create a custom security token by using Windows Identity Foundation; handle token formats (for example, oAuth, OpenID, Microsoft Account, Google, Twitter, and Facebook) for SAML and SWT tokens

Accessing data
Choose data access technologies
Choose a technology (ADO.NET, Entity Framework, WCF Data Services, Azure storage) based on application requirements

Querying and manipulating data by using Entity Framework
Query and manipulate data by using the Entity Framework
Query, update, and delete data by using DbContext; build a query that uses deferred execution; implement lazy loading and eager loading; create and run compiled queries; query data by using Entity SQL; perform asynchronous operations using Entity Framework; map a stored procedure
Query and manipulate data by using Data Provider for Entity Framework
Query and manipulate data by using Connection, DataReader, and Command from the System.Data.EntityClient namespace; perform synchronous and asynchronous operations; manage transactions (API); programmatically configure a Data Provider
Query data by using LINQ to Entities
Query data by using LINQ operators (for example, project, skip, aggregate, filter, and join); log queries and database commands; implement query boundaries (IQueryable vs. IEnumerable); implement async query
Create an Entity Framework data model
Structure the data model using table per type, table per class, table per hierarchy; choose and implement an approach to manage a data model (code first vs. model first vs. database first); implement POCO objects; describe a data model by using conceptual schema definitions, storage schema definition, mapping language (CSDL, SSDL, MSL), and Custom Code First Conventions

Designing and implementing WCF Services
Configure WCF services by using configuration settings
Configure service behaviors; configure service endpoints; configure bindings including WebSocket bindings; specify a service contract; expose service metadata (XSDs, WSDL, and metadata exchange endpoint); configure message compression and encoding
Secure a WCF service
Implement message level security, implement transport level security; implement certificates; design and implement multiple authentication modes

Creating and consuming Web API-based services
Design a Web API
Define HTTP resources with HTTP actions; plan appropriate URI space, and map URI space using routing; choose appropriate HTTP method (get, put, post, delete) to meet requirements; choose appropriate format (Web API formats) for responses to meet requirements; plan when to make HTTP actions asynchronous; design and implement routes
Implement a Web API
Accept data in JSON format (in JavaScript, in an AJAX callback); use content negotiation to deliver different data formats to clients; define actions and parameters to handle data binding; use HttpMessageHandler to process client requests and server responses; implement dependency injection, along with the dependency resolver, to create more flexible applications; implement action filters and exception filters to manage controller execution; implement asynchronous and synchronous actions; implement streaming actions; implement SignalR; test Web API web services
Secure a Web API
Implement HTTPBasic authentication over SSL; implement Windows Auth; prevent cross-site request forgery (XSRF); design, implement, and extend authorization and authentication filters to control access to the application; implement Cross Origin Request Sharing (CORS); implement SSO by using OAuth 2.0; configure multiple authentication modes on a single endpoint
Host and manage Web API
Host Web API in an ASP.NET app; self-host a Web API in your own process (a Windows service) including Open Web Interface for .NET (OWIN); host services in an Azure worker role; restrict message size; configure the host server for streaming
Consume Web API web services
Consume Web API services by using HttpClient synchronously and asynchronously; send and receive requests in different formats (JSON/HTML/etc.); request batching

Deploying web applications and services
Choose a deployment strategy for an Azure web application
Perform an in-place upgrade and VIP swap; configure an upgrade domain; create and configure input and internal endpoints; specify operating system configuration; deploy applications using Azure Web Site
Configure a web application for deployment
Switch from production/release mode to debug mode; use SetParameters to set up an IIS app pool; set permissions and passwords; enable and monitor ASP.NET App Suspend; configure WCF endpoints (including HTTPS protocol mapping), bindings, and behaviors; transform web.config by using XSLT (for example, across development, test, and production/release environments); configure Azure configuration settings
Create, configure, and publish a web package
Create an IIS InstallPackage; configure the build process to output a web package; apply pre- and post- condition actions to ensure that transformations are correctly applied; include appropriate assets (web content, certificates)
Share assemblies between multiple applications and servers
Prepare the environment for use of assemblies across multiple servers (interning); sign assemblies by using a strong name; deploy assemblies to the global assembly cache; implement assembly versioning; create an assembly manifest; configure assembly binding redirects (for example, from MVC4 to MVC5)
QUESTION 1
You need to choose the appropriate data access strategy for the college textbook area of the web application.
Which data access technology should you implement?

A. WCF Data Services
B. ADO.NET
C. Entity Data Model (EDM)
D. LINQ to SQL

Answer: D

---

QUESTION 2
You need to choose the appropriate data access technology for the children's book area of the web application.
Which data access technology should you choose?

A. ADO.NET Entity Framework
B. Web Service
C. LINQ to SQL
D. WCF Data Services

Answer: A

---

QUESTION 3
You are developing an ASP.NET MVC application that is secured using SSL. You are ready to deploy the application to production.
The deployment package must include the installation of the SSL certificate.
You need to configure the deployment package to meet the requirement.
What should you do?

A. In the Package/Publish settings of the project, select the All Files in this project folder option.
B. In the Build Events settings of the project, configure a pre-build event to include the SSL certificate.
C. Create a web publish pipeline target file with a custom web deploy target.
D. In the Signing dialog box, choose Sign the assembly and select the appropriate entry from the Choose a strong name key file list.

Answer: C

---

QUESTION 4
You need to choose the appropriate data access technology for the cookbook area of the web application. Which data access technology should you choose?

A. Entity Framework
B. ADO.NET
C. LINQ to SQL
D. WCF Data Services

Answer: D

Click here to view complete Q&A of 70-494 exam
Certkingdom Review

Best Microsoft MCTS Certification, Microsoft 70-494 Training at certkingdom.com